WE67K small and medium size electro-hydraulic servo CNC press brake

Equipment Photos:

WE67K-100T2500 electro-hydraulic servo CNC press brake

WE67K-125T2500 electro-hydraulic servo CNC press brake

WE67K-200T3200 electro-hydraulic servo CNC press brake

WE67K-600T6000 electro-hydraulic servo CNC press brake

Performance and features：

① Streamline design, high configuration, high precision and high efficiency;

② Electro hydraulic servo system, full closed-loop control slider synchronization;

③ The standard is 3 + 1 axis - Y1 (up and down of left cylinder), Y2 (up and down of right cylinder), X (forward and backward of back stopper), V (hydraulic deflection compensation);

④ It can be added to 4 + 1 axis, 6 + 1 axis or more as required by users; the standard CNC system is ESA S530, and users can choose DA52s, DA56s, DA58T and DA66T;

⑤ Adopt upper and lower double deflection compensation mechanism: - Mechanical top mold fast clamping device, which has both fast clamping function and upper module compensation function;

⑥ Hydraulic quick clamping device for top die, automatically controlled and compensated by numerical control system;

⑦ Key hydraulic and electrical components are international famous brand products;

⑧ Standard linear guide type movable back stop finger;

⑨ A set of standard top and bottom molds shall be provided with the machine;

One-time processing by 20m long and 6m high pentahedral machining center

17 meter long tempering furnace

Rack

1） The frame adopts one-time processing forming of pentahedron machining center to ensure the parallelism and verticality of each installation surface

2） The frame is derusted by sandblasting and sprayed with antirust paint

Machine main precision：

WE67K small and medium size electro-hydraulic servo CNC press brake is an upgraded product of normal press brake. Frequent conversion of production process can reduce the labor intensity of operators. But the operation skill of the operator is higher than that of the normal hydraulic press brake. The WE67K small and medium size electro-hydraulic servo CNC press brake (or the WE67K CNC press brake, WE67K CNC bending machine, the CNC hydraulic press brake, the press brake bending machine, the press brake 600 ton, the hydraulic servo press brake, hydraulic servo press brake 6000mm), the small CNC press brake( or small CNC bending machine), the small electro-hydraulic servo press brake( or small electro-hydraulic servo bending machine), the DA52 CNC press brake( or DA52 CNC bending machine), the DA56 CNC press brake, the DA58T CNC press brake, and the DA66T CNC press brake.

Project	Unit	Precision requirement
1, Slider Y1, Y2 axis precision
Repeatability accuracy	mm	≤+0.01
positioning accuracy	mm	≤+0.015
2. Working accuracy of machine tool
Bending angle accuracy of test piece	mm	+ 1°/3000 mm
Straightness accuracy of test piece	mm	±0.75/1000 mm

Basic configuration:

① Standard CNC 3 + 1 axis Y1, Y2, X axis and V (worktable compensation)

② The CNC system can be equipped with cybelec dnc600s, dnc880s, modeva10s, Delem DA52s, DA53T, DA56s, DA58T, DA66T, etc

③ Hydraulic and electrical components are well-known international brands

④ Standard straight track can be equipped with sliding front support

⑤ High precision back stop

⑥ One set of standard CNC top and bottom die

⑦ Quick clamping device

Basic functions of CNC system:

① Position and control the back stop of the WE67K CNC bending machine.

② The utility model of the small electro-hydraulic servo press brake( or small electro-hydraulic servo bending machine)has the function of one-way and two-way positioning, effectively eliminating the lead screw gap.

③ It has the function of returning and escaping materials, avoiding the interference between the back stop device and the workpiece, reducing wear and improving the positioning accuracy.

④ With automatic or manual search reference point function.

⑤ It has the function of power-off position memory to protect parameters, positions and programs on site.

⑥ It has quick position teaching function.

⑦ It has multi-step programming function, realizes multi-step automatic operation, completes multi-step parts one-time processing, and improves production efficiency.

⑧ Metric / English system is optional, which can meet the needs of different users.

DA52s Compact 4-axis Colour CNC System for Press Brakes:

DA52s Compact 4-axis colour CNC system for press brakes

The compact DA-52s is a complete CNC solution for conventional as well as synchronised press brakes. The panel based control, capable of controlling up to 4 axes, can be integrated in cabinets as well as in an optional pendulant arm housing. Equipped with the Delem userfriendly user interface, the DA-52s provides all main CNC hydraulic press brakes functionality. The unique ‘hotkey’ navigation gives direct access to the programs in memory and enables quick and easy programming of a product. All common bend parameters are located on one page. For advanced parameters an additional page can be selected. Angle programming of the Y-axis, crowning function and pressure control are standard on board. USB interfacing enables the use of memory sticks as a fast product and tool backup medium.

DA-52s features:

① Quick, one page programming

② Hotkey navigation

③ 7” widescreen colour TFT

④ Up to 4 axes (Y1, Y2, and 2 auxiliary axes)

⑤ Crowning control

⑥ Tool/material/product library

⑦ USB, peripheral interfacing

⑧ Advanced Y-axis control algorithms for closed loop as well as open loop valves

⑨ Panel based controller with optional housing

DA58T Compact 4-axes Graphical CNC System for Press Brakes:

DA58T Compact 4-axes colour graphical CNC system for press brakes

The new generation DA-50T-series offers easiest CNC programming based on the Delem graphical touch screen user interface. The DA-58T is a state of the art complete 2D graphical control solution for synchronized press brake bending machines. Its 15" high resolution colour TFT, with industrial grade multi touch screen technology, gives access to the proven Delem user-interface. It enables direct navigation between product programming and actual production. Functions are directly located where needed, offering optimised ergonomics throughout the entire application. Machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence. CNC programs are generated with a single touch. You are immediately ready to make the first part since all axes positions are automatically computed and the bend sequence has been simulated with machine and tools in real scale. The DA-58T offers 2D programming including automatic bend sequence calculation and collision detection. The production mode of the DA-58T helps the operator in graphically simulating the bend process of the product, guiding him during the press brake operation. The standard machine control functions are Y1-Y2 and X axis. A second back gauge axis can be used as R or Z axis. Also crowning control is standard on board.

DA-58T features:

 ① 2D graphical touch screen programming

 ② 15" high resolution colour TFT

 ③ Bend sequence calculation

 ④ Crowning control

 ⑤ Servo and frequency inverter control

 ⑥ Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.

 ⑦ USB, peripheral interfacing

DA56S Compact 4-axis Colour Graphical CNC System for Press Brakes:

DA56s Compact 4-axis colour graphical CNC system for press brakes

The compact DA-56s provides easy CNC programming with the Delem 2D graphical product design tool. Machine adjustment and test bends are reduced to a minimum because of the quick and easy to use bend sequence determination tool. The CNC program is generated with a one touch key stroke. You are ready to make the first part since all axes positions are automatically computed and the bend sequence has already been simulated on the screen with the machine and tools in real scale. In the production mode of the DA-56s the operator can graphically simulate the bend process of the product guiding him during the press brake operation.The basic machine control functions are Y1-Y2 and X axis, a second back gauge axis can be used as R/Z or X2 axis. Also the crowning function is standard on board.The CNC control is based on the latest technology giving flexibility to use. On board USB interfacing gives a fast product and tool backup medium.With the colour TFT LCD screen and the modern User Interface, the user has a clear and fast programming facility. Offline programming is possible with the DA-Offline solutions.

DA-56s features:

① 2D graphical programming

②10,4" LCD TFT colour display

③ Bend sequence determination

④ Developed length calculation

⑤ Crowning control

⑥ USB peripheral interfacing

⑦ Servo, frequency inverter and AC control

⑧ Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.

DA66T DA-Touch-series 2D Graphical control for CNC Press Brakes:

DA66T DA-Touch – series 2D graphical control for CNC press brake

The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s hydraulic servo press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. The OEM-panel located above the screen, reserved for machine functions and OEM application switches, is integrated in the design and can be used depending the required application.

DA-66T features:

① 2D graphical touch screen programming mode

② 3D visualisation in simulation and production

③ 17" high resolution colour TFT

④ Full Windows application suite

⑤ Delem Modusys compatibility (module scalability and adaptivity)

⑥ USB, peripheral interfacing

⑦ Open system architecture

⑧ Sensor bending & correction interface

DA69T DA-Touch – series 3D graphical control for CNC press brakes

DA69T DA-Touch – series 3D graphical control for CNC press brakes

The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s small CNC press brakes( or small CNC bending machines). Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. The DA-69T offers 2D as well as 3D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. The OEM-panel located above the screen, reserved for machine functions and OEM application switches, is integrated in the design and can be used depending the required application.

DA-69T features:

① 3D and 2D graphical touch screen programming mode