Equipment Photos:

2-WE67K-800T6000  CNC Electro-hydraulic servo tandem press brake

2-WE67K-1000T6000 CNC Electro-hydraulic servo tandem press brake

2-WE67K-1200T7000 CNC Electro-hydraulic servo tandem press brake

2-WE67K-1200T7000 CNC Electro-hydraulic servo tandem press brake

3-WE67K-500T6000 CNC Electro-hydraulic servo tandem press brake

Performance and features:

       The 2-WE67K Tandem press brake adopts the Double or multi machine synchronous working principle.  Adopt the electro-hydraulic proportional valve servo synchronization of Bosch company, with excellent performance, small friction force in mechanical action, electronic amplifier and electric magnet have high-efficiency control force and continuous reaction force. There are two raster displays on both sides of the machine, which constantly check the position of the slider and feed back the information to the control system. Then the control system controls the electro-hydraulic valve to drive the two cylinders to move at the same time. Since the raster display is installed on the "C" plate instead of directly on the column, the deflection of the slider and the frame will not affect the measurement and control accuracy when working. When the two machines work at the same time, the potentiometer installed in the two machines converts the mechanical synchronous signal into the same electronic signal, and feeds back to the synchronous board and the control system. After the signal is amplified by the Bosch amplifier, it is controlled by the electro-hydraulic synchronous valve, so it can achieve high precision. Through the computer, we can communicate with the machine. The computer has many languages, it can calculate and adjust the bending force automatically. At the same time, it can calculate the control stop and speed change point. The stroke number of the slider (Y1, Y2) can be changed according to the user needs. With excellent guide system, position measurement system, hydraulic balance system, to meet different lengths and special needs. Worktable compensation device is used to prevent the influence of machine deflection and ensure the accuracy of workpiece. And The 2-WE67K Tandem press brake also can be named by the tandem press brake( or the tandem bending machine/ tandem press brake 1200 ton/ tandem press brake 800 ton/ tandem press brake 600 ton), the tandem CNC press brake( or the CNC tandem press brake/ CNC tandem bending machine), and the tandem electro-hydraulic servo CNC press brake( or the double linkage press brake/ tandem electro-hydraulic servo CNC bending machine/ double linkage bending machine).

        ① All steel plate of the tandem press brake( tandem bending machine) is whole welded, with strong seismic resistance

       ② The tandem CNC press brake( or the CNC tandem press brake/ CNC tandem bending machine) adopts large tempering furnace to eliminate internal stress, with good stability, high strength and stable operation

                 ★ Equipped with double linkage synchronous device;

               ★ The tandem press brake can process the extra long workpiece, especially suitable for the processing and manufacturing of the extra long workpiece such as the road lamp pole and power pole of the urban construction and expressway;

                 ★ Two machines can also be used separately to improve production efficiency;

                 ★ Special requirements can be specially designed and manufactured;

One-time processing by 20m long and 6m high pentahedral machining center

17 meter long tempering furnace

Rack

        ③ The frame adopts one-time processing forming of pentahedron machining center to ensure the parallelism and verticality of each installation surface

         ④ The frame is derusted by sandblasting and sprayed with antirust paint

Main configuration of the machine：

         ① Special CNC system for press brake of Delem company in the Netherlands

         ② Bosch high performance servo hydraulic system control synchronization

         ③ High performance servo motor and ball screw for back stop

         ④ Both sides are equipped with optical ruler to detect synchronous position feedback

         ⑤ Mechanical down slope block type deflection compensation or hydraulic compensation system controlled by DNC System

         ⑥ One set of top and bottom mold

         ⑦ Front support

Basic configuration:

        ① Special CNC system for press brake of Delem company in the Netherlands

         ② Bosch high performance servo hydraulic system control synchronization

         ③ High performance servo motor and ball screw for back stop

         ④ Both sides are equipped with optical ruler to detect synchronous position feedback

         ⑤ Mechanical down slope block type deflection compensation or hydraulic compensation system controlled by DNC System

         ⑥ One set of top and bottom mold

         ⑦ Front support

Quick clamping device

Basic functions of CNC system:

         ① Position and control the back stop of the tandem press brake( or the tandem bending machine/ tandem press brake 1200 ton/ tandem press brake 800 ton/ tandem press brake 600 ton.

        ② The utility model has the function of one-way and two-way positioning, effectively eliminating the lead screw gap.

        ③ It has the function of returning and escaping materials, avoiding the interference between the back stop device and the workpiece, reducing wear and improving the positioning accuracy.

        ④ With automatic or manual search reference point function.

        ⑤ It has the function of power-off position memory to protect parameters, positions and programs on site.

        ⑥ It has quick position teaching function.

        ⑦ It has multi-step programming function, realizes multi-step automatic operation, completes multi-step parts one-time processing, and improves production efficiency.

        ⑧ Metric / English system is optional, which can meet the needs of different users.

DA52s Compact 4-axis Colour CNC System for Press Brakes:

DA52s Compact 4-axis colour CNC system for press brakes

        The compact DA-52s is a complete CNC solution for conventional as well as synchronised press brakes. The panel based control, capable of controlling up to 4 axes, can be integrated in cabinets as well as in an optional pendulant arm housing. Equipped with the Delem userfriendly user interface, the DA-52s provides all main functionality. The unique ‘hotkey’ navigation gives direct access to the programs in memory and enables quick and easy programming of a product. All common bend parameters are located on one page. For advanced parameters an additional page can be selected. Angle programming of the Y-axis, crowning function and pressure control are standard on board. USB interfacing enables the use of memory sticks as a fast product and tool backup medium.

DA-52s features:

      ① Quick, one page programming

       ② Hotkey navigation

       ③ 7” widescreen colour TFT

       ④ Up to 4 axes (Y1, Y2, and 2 auxiliary axes)

       ⑤ Crowning control

       ⑥ Tool/material/product library

       ⑦ USB, peripheral interfacing

       ⑧ Advanced Y-axis control algorithms for closed loop as well as open loop valves

      ⑨ Panel based controller with optional housing

DA58T Compact 4-axes Graphical CNC System for Press Brakes:

DA58T Compact 4-axes colour graphical CNC system for press brakes

        The new generation DA-50T-series offers easiest CNC programming based on the Delem graphical touch screen user interface. The DA-58T is a state of the art complete 2D graphical control solution for synchronized  2-WE67K Tandem press brakes. Its 15" high resolution colour TFT, with industrial grade multi touch screen technology, gives access to the proven Delem user-interface. It enables direct navigation between product programming and actual production. Functions are directly located where needed, offering optimised ergonomics throughout the entire application. Machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence. CNC programs are generated with a single touch. You are immediately ready to make the first part since all axes positions are automatically computed and the bend sequence has been simulated with machine and tools in real scale. The DA-58T offers 2D programming including automatic bend sequence calculation and collision detection. The production mode of the DA-58T helps the operator in graphically simulating the bend process of the product, guiding him during the press brake operation. The standard machine control functions are Y1-Y2 and X axis. A second back gauge axis can be used as R or Z axis. Also crowning control is standard on board.

DA-58T features:

   ① 2D graphical touch screen programming

   ② 15" high resolution colour TFT

   ③ Bend sequence calculation

   ④ Crowning control

   ⑤ Servo and frequency inverter control

   ⑥ Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.

   ⑦ USB, peripheral interfacing

DA56S Compact 4-axis Colour Graphical CNC System for Press Brakes:

DA56s Compact 4-axis colour graphical CNC system for press brakes

        The compact DA-56s provides easy CNC programming with the Delem 2D graphical product design tool. Machine adjustment and test bends are reduced to a minimum because of the quick and easy to use bend sequence determination tool. The CNC program is generated with a one touch key stroke. You are ready to make the first part since all axes positions are automatically computed and the bend sequence has already been simulated on the screen with the machine and tools in real scale. In the production mode of the DA-56s the operator can graphically simulate the bend process of the product guiding him during the press brake operation.The basic machine control functions are Y1-Y2 and X axis, a second back gauge axis can be used as R/Z or X2 axis. Also the crowning function is standard on board.The CNC control is based on the latest technology giving flexibility to use. On board USB interfacing gives a fast product and tool backup medium.With the colour TFT LCD screen and the modern User Interface, the user has a clear and fast programming facility. Offline programming is possible with the DA-Offline solutions.

DA-56s features:

        ① 2D graphical programming

        ②10,4" LCD TFT colour display

        ③ Bend sequence determination

        ④ Developed length calculation

        ⑤ Crowning control

        ⑥ USB peripheral interfacing

        ⑦ Servo, frequency inverter and AC control

        ⑧ Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.

DA66T DA-Touch-series 2D Graphical control for CNC Press Brakes:

DA66T DA-Touch – series 2D graphical control for CNC press brake

       The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of  2-WE67K Tandem press brakes ( or  tandem press brake 1200 ton/ tandem press brake 800 ton/ tandem press brake 600 ton). Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. The OEM-panel located above the screen, reserved for machine functions and OEM application switches, is integrated in the design and can be used depending the required application.

DA-66T features:

        ① 2D graphical touch screen programming mode

        ② 3D visualisation in simulation and production

        ③ 17" high resolution colour TFT

        ④ Full Windows application suite

        ⑤  Delem Modusys compatibility (module scalability and adaptivity)

        ⑥ USB, peripheral interfacing

        ⑦ Open system architecture

        ⑧ Sensor bending & correction interface

DA69T DA-Touch – series 3D graphical control for CNC press brakes

DA69T DA-Touch – series 3D graphical control for CNC press brakes

       The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of  tandem CNC press brake( or the CNC tandem press brake/ CNC tandem bending machine). Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. The DA-69T offers 2D as well as 3D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. The OEM-panel located above the screen, reserved for machine functions and OEM application switches, is integrated in the design and can be used depending the required application.

DA-69T features:

        ① 3D and 2D graphical touch screen programming mode

        ② 3D visualisation in simulation and production

        ③ 17" high resolution colour TFT

        ④ Full Windows application suite

        ⑤ Delem Modusys compatibility (module scalability and adaptivity)

        ⑥ USB, peripheral interfacing

        ⑦ Open system architecture

        ⑧ Sensor bending & correction interface

Packing & Delivery: